TP-Link 5-Port 2.5G Desktop Switch with 4-Port PoE++
TP-Link · Part number: TL-SG105PP-M2
$205.44 · On order
Description
Overview TL-SG105PP-M2 is an unmanaged switch with 5 Gigabit ports that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at/bt compliant Powered Devices (PDs) at port 1-4. In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. The 2.5G ports support automatic negotiation to 10Mbps/100Mbps/1Gbps/2.5Gbps according to the type of connected device and provide sufficient bandwidth to unlock the highest performance of 2.5G/Multi-Gigabit devices, including NAS, a personal workstation, 8K video stream, and 2.5G Wi-Fi 6 AP. Power Over Ethernet 4 RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet (PoE) function. They can automatically detect and supply power with those connected IEEE 802.3af/at/bt compliant Powered Devices (PDs). Overload Arrangement TL-SG105PP-M2 has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ≥ 123 W*, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port. Intelligent Power Management Priority (port 1 > port 2 > port 3 > port 4): This function will help protect the system when the system power is overloaded. For example, port 2, 3, and 4 is using 35 W respectively (maximum power per port is 60 W); the system power is 105W in total. If there is an additional PD inserted to port 1 with 23 W, and then the system will cut off the power of port 4 because of the overloaded power, this means port 1 will use 23 W respectively and port 2&3 will use 35 W, no power will be supplied to port 4. Highlight Performance - With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD)…
Specifications
- Switch type
- Unmanaged
- Quality of Service (QoS) support
- Yes
- Basic switching RJ-45 Ethernet ports quantity
- 5
- Basic switching RJ-45 Ethernet ports type
- Gigabit Ethernet (10/100/1000)
- 2.5G Ethernet (copper) ports quantity
- 5
- Networking standards
- IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
- 10G support
- No
- Copper ethernet cabling technology
- 10BASE-T, 100BASE-TX, 1000BASE-T
- Cable types supported
- Cat3, Cat4, Cat5, Cat5e
- Flow control support
- Yes
- Auto MDI/MDI-X
- Yes
- Auto-negotiation
- Yes
- MAC address auto-learning supported
- Yes
- MAC address auto-aging supported
- Yes
- Switching capacity
- 25 Gbit/s
- Forwarding rate
- 18.6 Mpps
- MAC address table
- 4000 entries
- Store-and-forward
- Yes
- IGMP snooping
- Yes
- Rack mounting
- No
- Product colour
- Black
- Housing material
- Steel
- LED indicators
- Yes
- Fanless
- Yes
- Power source
- DC/PoE
- Power supply included
- Yes
- Number of power supply units
- 1
- AC input voltage
- 220 V
- AC input frequency
- 50 Hz
- Input current
- 2.43 A
- Input voltage
- 53.5 V
- Power consumption (max)
- 143.37 W
- Power over Ethernet (PoE)
- Yes
- Power over Ethernet 4PPoE (PoE++) ports quantity
- 4
- Power over Ethernet (PoE) power per port
- 60 W
- Total Power over Ethernet (PoE) budget
- 123 W
- Operating temperature (T-T)
- 0 - 40 °C
- Storage temperature (T-T)
- -40 - 70 °C
- Operating relative humidity (H-H)
- 10 - 90%
- Storage relative humidity (H-H)
- 5 - 90%
Request a quote · Phone: 450-735-1466