Manhattan Intellinet PoE-Powered 6-Port Lite Smart Managed PoE+ Switch with 4 GbE Ports / 2 GbE Uplinks and PoE Passthrough
Manhattan · Part number: 562034
$205.46 · On order
Description
A managed PoE passthrough switch to get the most out of each Power over Ethernet connection The PoE-Powered 6-Port Lite Smart Managed PoE+ Switch with 4 GbE Ports / 2 GbE Uplinks and PoE Passthrough from Intellinet Network Solutions is designed to take power from a PoE switch or injector and pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with six Gigabit Ethernet ports, this switch can power up to four wireless LAN access points and bridges, VoIP phones or IP video cameras, draw its own power from the PoE switch it is connected to, and deliver network speeds up to 1,000 Mbps. Usable as a PoE extender Thanks to its PoE passthrough technology that extends a PoE connection, this versatile unit doubles the range between PoE source and device from 100 m (328 ft.) to 200 m (656 ft.). Using it this way also eliminates the time and expense of electrical rewiring, which minimizes the unsightly clutter of power cables in awkward places such as ceilings and walls while providing up to 30 W to compatible devices. Lite and smart network management With a simplified web interface and the most common configuration options, this switch is reduced to the essentials for a user-friendly installation. The Perfect Workgroup Switch When you connect the PD port (port 6) to a PoE injector or switch, this product uses some of the electric current to power itself. It then passes the available surplus power to four or fewer PoE edge devices, such as VoIP phones, allowing you to realize the full potential of each of the PSE ports in your data center. Eliminate Bottlenecks with Gigabit Speeds Equipped with six auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the switch's 12 Gbps switch fabric provides plenty of performance for your computers and other networking devices. Wall-mount option For full installation flexibility, you can mount the switch on the wall through its four built-in holes or use the incl…
Specifications
- Switch type
- Managed
- Quality of Service (QoS) support
- Yes
- Basic switching RJ-45 Ethernet ports quantity
- 6
- Basic switching RJ-45 Ethernet ports type
- Gigabit Ethernet (10/100/1000)
- Power connector
- AC-in jack
- Networking standards
- IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
- 10G support
- No
- Copper ethernet cabling technology
- 10BASE-T, 100BASE-TX, 1000BASE-T
- Cable types supported
- Cat5e
- Port mirroring
- Yes
- Full duplex
- Yes
- Half duplex
- Yes
- Flow control support
- Yes
- Broadcast storm control
- Yes
- Ethernet LAN data rates
- 10,100,1000 Mbit/s
- Auto-sensing
- Yes
- MAC address auto-learning supported
- Yes
- MAC address auto-aging supported
- Yes
- VLAN support
- Yes
- Virtual LAN features
- Port-based VLAN, Tagged VLAN
- Switching capacity
- 12 Gbit/s
- Forwarding rate
- 8.93 Mpps
- MAC address table
- 8000 entries
- Store-and-forward
- Yes
- Jumbo frames support
- Yes
- Jumbo frames
- 9216
- Packet buffer memory
- 4.1 MB
- Rack mounting
- No
- Product colour
- Black
- Housing material
- Metal
- Reset button
- Yes
- LED indicators
- Activity, Link, PoE, Power
- Wall mountable
- Yes
- Mean time between failures (MTBF)
- 50000 h
- Power source
- AC/PoE
- AC input voltage
- 100 - 240 V
- AC input frequency
- 50/60 Hz
- Power consumption (max)
- 65 W
- Power protection features
- Over voltage, Overload, Short circuit, Surge protection
- Power over Ethernet (PoE)
- Yes
Request a quote · Phone: 450-735-1466