Manhattan Intellinet 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports
Manhattan · Part number: 561341
$568.50 · On order
Description
Save installation time and money with PoE The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports (561341) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with sixteen Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras and more while delivering network speeds of up to 1,000 Mbps. Power over Ethernet 802.3at The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest use of an Intellinet Network Solutions PoE/PoE+ Splitter. Sophisticated PoE Management Features The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch provides detailed, real-time information about the connected PoE devices, how much power they draw and how much power is still available. The delay-time-per-port feature reduces the power hike that usually happens at system start, and the PoE priority feature (low, medium, high) allows you to define mission-critical ports that will continue to receive power even if the switches power budget limit has been exceeded. Furthermore, you can define the maximum…
Specifications
- Switch type
- Managed
- Switch layer
- L2+
- Quality of Service (QoS) support
- Yes
- Web-based management
- Yes
- Basic switching RJ-45 Ethernet ports quantity
- 16
- Basic switching RJ-45 Ethernet ports type
- Gigabit Ethernet (10/100/1000)
- Gigabit Ethernet (copper) ports quantity
- 16
- SFP module slots quantity
- 2
- Networking standards
- IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u
- 10G support
- No
- Copper ethernet cabling technology
- 10BASE-T, 100BASE-TX, 1000BASE-T
- Cable types supported
- Cat3, Cat4, Cat5, Cat5e
- Port mirroring
- Yes
- Full duplex
- Yes
- Flow control support
- Yes
- Link aggregation
- Yes
- Broadcast storm control
- Yes
- Rate limiting
- Yes
- Auto MDI/MDI-X
- Yes
- Spanning tree protocol
- No
- Auto-sensing
- Yes
- VLAN support
- Yes
- Virtual LAN features
- Tagged VLAN, Port-based VLAN
- Number of VLANs
- 4096
- Switching capacity
- 36 Gbit/s
- MAC address table
- 8000 entries
- Store-and-forward
- Yes
- Jumbo frames support
- Yes
- Jumbo frames
- 9000
- Packet forwarding rate (1 Gbps)
- 1488000 pps
- Packet forwarding rate (100 Mbps)
- 148800 pps
- Packet forwarding rate (10 Mbps)
- 14880 pps
- Packet buffer memory
- 0.512 MB
- Access Control List (ACL)
- Yes
- IGMP snooping
- Yes
- Security algorithms
- 802.1x RADIUS, HTTPS, SSH, SSH-2
- Authentication
- Port-based authentication
- Multicast support
- Yes
- Management protocols
- SNMP, Telnet, SSH
- Rack mounting
- Yes
Request a quote · Phone: 450-735-1466