Manhattan Intellinet 5-Port Gigabit Switch with PoE Passthrough
Manhattan · Part number: 561082
$132.49 · On order
Description
Save installation time and money with PoE and get the most out each PoE connection with PoE passthrough! The Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch with PoE Passthrough is designed to take power from a PoE switch and pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports, this switch can power up to four wireless LAN access points and bridges, VoIP phones or IP video cameras, draw its own power from the PoE switch it is connected to, and deliver network speeds of up to 1,000 Mbps. The Perfect Workgroup Switch When you connect the PD port (port 1) to a PoE+ enabled IEEE 802.3af/at compliant PoE switch, the Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch uses some of the electric current to power itself and passes the available surplus power to up to four PoE edge devices, such as VoIP phones, allowing you to realise the full potential of each of the PSE ports in your data centre. Power over Ethernet 802.3at The Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch with PoE Passthrough supports the IEEE 802.3at protocol and is designed to inject up to 25 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter. Eliminate Bottlenecks with Gigabit Speeds Equipped with five auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the Intellinet Net…
Specifications
- Basic switching RJ-45 Ethernet ports quantity
- 5
- Basic switching RJ-45 Ethernet ports type
- Gigabit Ethernet (10/100/1000)
- Networking standards
- IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
- 10G support
- No
- Copper ethernet cabling technology
- 10BASE-T, 100BASE-TX, 1000BASE-T
- Cable types supported
- Cat5e, Cat6
- Flow control support
- Yes
- Auto MDI/MDI-X
- Yes
- Switching capacity
- 10 Gbit/s
- MAC address table
- 2048 entries
- Store-and-forward
- Yes
- Packet forwarding rate (1 Gbps)
- 1488000 pps
- Packet forwarding rate (100 Mbps)
- 148800 pps
- Packet forwarding rate (10 Mbps)
- 14880 pps
- Product colour
- Black
- Housing material
- Metal
- LED indicators
- Activity, Link, Power
- Power supply included
- Yes
- AC input voltage
- 100 - 240 V
- AC input frequency
- 50 - 60 Hz
- Input current
- 2.5 A
- Power consumption (max)
- 75 W
- Power over Ethernet (PoE)
- Yes
- Total Power over Ethernet (PoE) budget
- 26 W
- Operating temperature (T-T)
- 0 - 40 °C
- Storage temperature (T-T)
- 0 - 70 °C
- Operating relative humidity (H-H)
- 10 - 90%
- Width
- 140 mm
- Depth
- 78 mm
- Height
- 28 mm
- Weight
- 600 g
- Cables included
- AC
- Manual
- Yes
- Certification
- FCC Class B, CE, RoHS
- Harmonized System (HS) code
- 85176990
Request a quote · Phone: 450-735-1466