APC Smart-UPS
APC · Part number: SMT3000RMUS
$3,566.76 · On order
Description
Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Predictive replace battery date Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Outlet group control Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups). Sequenced shutdown and restart Configure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups). Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding. Sine wave output Eliminates humming and heat generated when powering tubelights and fans. StruxureWare Central compatible Enables centralized management via StruxureWare Central. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance LED Indicators Provide easy-to-read status of the unit and utility power conditions. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Disconnected battery notification Warns when a battery is not available to provide backup power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Automatic restart of…
Specifications
- Output power capacity
- 2.88 kVA
- Output power
- 2700 W
- Waveform
- Sine
- Input operation voltage (min)
- 75 V
- Input operation voltage (max)
- 154 V
- Input frequency
- 50/60 Hz
- Surge energy rating
- 459 J
- Efficiency
- 98%
- Output voltage Total Harmonic Distortion (THD)
- 5%
- Noise level
- 55 dB
- Audible alarm(s)
- Yes
- Audible alarm modes
- Battery replacement
- AC outlet types
- NEMA 5–15R, NEMA 5–20R
- Power plug
- NEMA L5-30P
- AC outlets quantity
- 8 AC outlet(s)
- USB 2.0 ports quantity
- 1
- Battery technology
- Sealed Lead Acid (VRLA)
- Typical backup time at full load
- 3.4 min
- Typical backup time at half load
- 7.2 min
- Battery recharge time
- 3 h
- Replacement battery cartridge
- RBC43
- Form factor
- Rackmount
- Rack capacity
- 2U
- Cable length
- 2.44 m
- Product colour
- Grey
- Display type
- LCD
- Operating temperature (T-T)
- 0 - 40 °C
- Storage temperature (T-T)
- -15 - 45 °C
- Operating relative humidity (H-H)
- 0 - 95%
- Storage relative humidity (H-H)
- 0 - 95%
- Operating altitude
- 0 - 3000 m
- Non-operating altitude
- 0 - 15000 m
- Compliance certificates
- RoHS
- Sustainability certificates
- ENERGY STAR
- Width
- 480 mm
- Depth
- 683 mm
- Height
- 86 mm
- Weight
- 44.3 kg
- Package weight
- 51.7 kg
- Nominal output voltage
- 120 V
Request a quote · Phone: 450-735-1466